Last updated:

Create a DevOps Kubeconfig on AWS

If you have trouble deploying applications into your project when running a pipeline on your AWS cluster with KubeSphere installed, it may be caused by the issue of DevOps kubeconfig. This tutorial demonstrates how to create a DevOps kubeconfig on AWS.

Prerequisites

You have an AWS cluster with KubeSphere installed. For more information about how to install KubeSphere on AWS, refer to Deploy KubeSphere on AWS EKS.
You have enabled the KubeSphere DevOps system.
You have a project available for deploying applications. This tutorial uses the project kubesphere-sample-dev as an example.

Create a DevOps Kubeconfig

Step 1: Create a Service Account

Create a devops-deploy.yaml file on your AWS cluster and enter the following contents.

---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: devops-deploy
  namespace: kubesphere-sample-dev
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: devops-deploy-role
  namespace: kubesphere-sample-dev
rules:
- apiGroups:
  - "*"
  resources:
  - "*"
  verbs:
  - "*"
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: devops-deploy-rolebinding
  namespace: kubesphere-sample-dev
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: devops-deploy-role
subjects:
- kind: ServiceAccount
  name: devops-deploy
  namespace: kubesphere-sample-dev

Run the following command to apply the YAML file.
```
kubectl apply -f devops-deploy.yaml
```

Step 2: Get the Service Account Token

Run the following command to get the Service Account token.

export TOKEN_NAME=$(kubectl -n kubesphere-sample-dev get sa devops-deploy -o jsonpath='{.secrets[0].name}')
kubectl -n kubesphere-sample-dev get secret "${TOKEN_NAME}" -o jsonpath='{.data.token}' | base64 -d

The output is similar to the following:

Step 3: Create a DevOps kubeconfig

Log in to your KubeSphere console of the AWS cluster and go to your DevOps project. Go to Credentials under Project Management, and then click Create. You can name this kubeconfig based on your needs.

In the Content text box, pay attention to the following contents:

user:
    client-certificate-data: LS0tLS1CRUdJTiBDRVJUSUZJQ0FUR...
    client-key-data: LS0tLS1CRUdJTiBQUk...

You have to replace them with the token retrieved in step 2, then click OK to create the kubeconfig.

user:
  token:eyJhbGciOiJSUzI1NiIsImtpZCI6Ikl3UkhCay13dHpPY2Z6LW9VTlZKQVR6dVdmb2FHallJQ2E4VzJULUNjUzAifQ.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.Ls6mkpgAU75zVw87FkcWx-MLEXGcJjlnb4rUVtT61Jmc_G6jkn4X45MK1V_HuLje3JZMFjL80QUl5ljHLiCUPQ7oE5AUZaUCdqZVdDYEhqeFuGQb_7Qlh8-UFVGGg8vrb0HeGiOlS0qq5hzwKc9C1OmsXHS92yhNwz9gIOujZRafnGKIsG6TL2hEVY2xI0vvmseDKmKg5o0TbeaTMVePHvECju9Qz3Z7TUYsr7HAOvCPtGutlPWLqGx5uOHenOdeLn71x5RoS98xguZoxYVollciPKCQwBlZ4zWK2hzsLSNNLb9cZpxtgUVyHE0AB0e86IHRngnnNrzpp1_pDxL5jw/

Note

Make sure you use your own token.

Feedback

Was this page Helpful?

Thanks for the feedback. If you have a specific question about how to use KubeSphere, ask it on Slack. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.

Previous : Install Plugins to Jenkins in KubeSphere Next : Remove Built-in Apps in KubeSphere

What’s on this Page